HOW TO ROOT ANY MTK (CHAINESE) PHONE..
You need a
usb cable and a pc with mtk droid tools and sp-flash tools
Now first of
all you need to create a scatter file.
1. Scatter creation
Scatter is
the text file with adress of the blocks, necessary for the SP FlashTool
program.
to create it
you need to connect your phone to the pc , run mtk droid tools and click on
blocks map and create scatter.
After
creation of scatter don't close the main window of the program!
Otherwise
once again it is necessary to turn on phone.
2. In SP FlashTool choose this scatter and go on the Read Back tab.
3. Choose path and a ROM file name
Click on Add
button. Double click of a mouse on the appeared line. Choose a file name, the
name has to begin with ROM_ as offers FlashTool! Remember path and the name of
ROM_ file.
4. Determine the ROMsize
Type has to
stand in HEX. In the field of Start Address it is necessary to write down
0x000000. In the field of Length we copy from scatter the address of the block
following after RECOVERY. If you want to make a full backup , just copy the
last adress block. For phones with type of the blocks EXT4 it is the cache
block address. The number in the Hex format has to begin with 0x
5 . Choose Read Page Only on yaffs2 type blocks phones
In FlashTool
choose Read Page Only in the field of Read Method. If this field isn't present,
the window with this question can emerge, too we choose Page Only. On phones with
EXT4 blocks it doesn't
get out (as
a rule). In the newer versions you won´t find that. There is no need to adjust
it.
6. Read Back ROM_
Click
on Read Back button and connect the switched-off phone to PC. Here the options
depending on a concrete phone are possible. Maybe it is necessary to press at
the same time with connect of a cable the camera or volume buttons.
7. Prepare files for FlashTool and make CWM
If
everything passed without errorss, we open the MTK Droid Root & Tools
window which we left on 1th step. If for some reason the window isn't present,
it is necessary to turn on phone and to connect it to the program. Click on To
process file ROM_ from FlashTool button and choose the ROM_* file saved on the
6th step. At successful unpacking rom it will be offered to choose CWM from
similar phone. Chosen CWM it is checked on compliance to the connected phone
and if ok, the CWM is created. Starting with v2.4.0 CWM it is made
automatically and the file from similar phone shouldn't be looked for any more!
8. Download new CWM to the phone
Start
FlashTool, choose scatter in the folder created on the 7th step. Remove marks from
all blocks! Click on RECOVERY and we choose the file CWM in the same folder
which was created on the 7th step. Click Download and connect a cable to PC
(phone has to be switched off) and expect the end of process. DANGEROUS! On
this step the CWM recovery block has to be marked only! Also it is necessary to
use only the Download button and not to use at all the Firmware Upgrade
button!. DO NOT FLASH PRELOADER
9. Make backup, install SuperUser etc
Load phone
in CWM mode, connect to MTK Droid Root & Tools, go on the tab root, backup,
recovery and, pressing on this tab the necessary buttons, we do:
- backup! !
!
- install
superuser (often mean "get root" under it)
- and other
if need
